東莞市AG8亞洲遊印刷材料有限公司 設為首頁 | 添加收藏
 
  當前位置:東莞市AG8亞洲遊印刷材料有限公司 > 產品展示 > “全息轉移UV光油”的詳細信息
產品類別
紙張UV光、啞油係列 (22)
水性光、啞油係列 (9)
膠黏劑係列 (6)
特種薄膜專用光、啞油 (5)
油性光油係列 (0)
成功案例 (8)
產品展示
  上一個下一個
產品名稱: 全息轉移UV光油
產品型號: YK-6011
點擊次數: 6945次
產品信息:
YK-6011高級轉移UV光油
YK-6011 Transfer UV VARNISH
一、      產品簡介
1. Introduction
YK6011在使用時,不需要上水性UV底油,一次塗布在膠印油墨上即有附著力好、光澤高、耐磨性好,氣味低,白度好等優點,同時比普通轉移UV油減少了一道工序,減少了水性底油使用不當引起的麻煩。該產品主要由光固化樹脂,活性稀釋劑等組成,經紫外線照射可迅速固化成膜。廣泛應用於不同紙張,作為表麵轉移上光之用。圖案轉移效果好
本產品符合玩具安全衛生,美國ASTM F963-03,歐盟EN71,ROHS標準,已通過“SGS”重金屬含量檢驗測試。
6011, when used, do not need the water-based base oil, a coating that is in the offset printing ink on good adhesion, high gloss, good wear resistance, low odor, and good whiteness, while transfer of UV than ordinary oil reduced a process, a water-based base oil to reduce the trouble caused by improper use. The products are mainly from the light-cured resin, reactive diluent etc., can be quickly cured by ultraviolet radiation film. Widely used in different paper, used as a polishing surface transfer.
This product meets toy safety and health, the U.S. ASTM F963-03, European EN71, ROHS standards, have passed "SGS" content of heavy metal testing.
二、技術指標:
2.technical indicators:
1.外     觀:淡黃色到黃色半透明液體
2.粘     度:60±2秒(塗—4杯,25℃)
3.酸     值:<5mgKOH/g
4.耐  磨 性:優
5.附  著 力:好
6.光     澤:70-80GU(光澤計,60度角)
7.固化 能量:≥75MJ/ cm2
8.塗布   量:推薦塗布量3-5G/㎡
9.適用 油墨:適用於市售多數油墨,但使用前油墨應被預先檢測;
1. Appearance: light yellow to yellow translucent liquid
2. Viscosity: 60 ± 2 seconds (T -4 cups, 25 ℃)
3. Acid value: <5mgKOH / g
4. Wear resistance: good
5. Adhesion: Good
6. Gloss: 70-80GU  (gloss meter, 60 degree angle)
7. curing energy: ≥ 75MJ / cm2
8. coated amount: Recommended coating weight 3-5G /㎡
9. for ink: For most commercial ink, but before the ink used should be pre-testing;
三、建議使用方法
3. Suggested Use
1、輥塗施工,上油量視紙張品質而定。
2、紫外光強度最好保持大於75mj/cm2進行幹燥。
3、加入少量IPA或醋酸乙酯等溶劑可調整施工粘度。
4、在使用6011之前,要清洗幹淨油槽以及橡膠輥或陶瓷輥上的其它UV油,以免影響產品的使用性能。
1, Construction of roll coating, depending on the fuel quality of paper may be.
2, UV intensity is best to keep more than 75mj/cm2 solidify
3, adding a small IPA of anhydrous alcohol or ethyl acetate solvent such as construction of adjustable viscosity.
4, before using the 6011 to clean the tank and the rubber rollers or ceramic roller on the other UV oil, so as not to affect product performance.
四、注意事項
4. Notes
1、產品保質期為六個月,請在有效期內使用。
2、避免陽光直射,避免開口長時間暴露於強光下。
3、可使用本公司生產的K695或IPA作為機械清潔劑。
4、以上相關數據來源於實驗室,實際使用時僅作參考!由於紙張、油墨以及施工工藝的不同,會有所差別,請各客戶根據自己的要求先對本產品進行試驗,再決定其適用性!
1, the product shelf life of six months, in the period to use.
2, avoid direct sunlight, avoid prolonged exposure to strong light openings.
3, may use the company's K695 or IPA as a mechanical cleaner.
4, the above data comes from the laboratory, the actual use for reference only! As the paper, ink, and the different construction technique will be different, please request the customer according to their own first test of the product, and then determine their suitability!
五、包裝規格
5. Packing
1、黃色鐵罐包裝.
2、淨重20公斤
1, yellow tin packaging.
2, weight 20 kg
 
版權所有©東莞市AG8亞洲遊印刷材料有限公司   製作與維護:星河科技   後台管理   企業郵箱    
    
唐生
肖先生